Before we use the fiber laser cutting machine, we need to make the drawings and import them into the computer program, and then use the typesetting software to arrange the graphics we need to cut on a sheet for mass production of products. What are the precautions for the laser cutting machine typesetting tutorial? Please refer to the following content.
Table of Contents
Laser cutting machine parts spacing
Generally, when cutting thick plates and hot plates, the distance between parts should be large, because the heat of the thick plate hot plate has a greater influence. When cutting corners and small graphics, it is easy to burn edges and affect the cutting quality.
Laser cutting machine lead setting
In the process of cutting thicker plates, in order to make the slit joint well and prevent the start and end burns, a transition line is often introduced at the beginning and the end of the cutting, called the lead and the tail.
The lead wire and tail wire are useless to the workpiece itself, so they should be arranged outside the scope of the workpiece. At the same time, be careful not to set the lead wire in sharp corners and other places where heat dissipation is not easy. The connection between the lead wire and the slit should adopt a circular arc transition as far as possible to make the machine move smoothly and avoid burns caused by the corner stall.
Laser cutting machine corner melting
When cutting the corners of thin steel plates at a reduced speed, the laser will overheat and melt the corners. Generate a small radius at the corner to maintain the high-speed laser cutting, avoid the phenomenon of overheating and melting of the steel plate when cutting the corner, so as to obtain a good cutting quality, reduce cutting time, and improve productivity.
Laser cutting machine residual material handling
After the parts are cut, the skeleton-like residual material on the worktable of the laser cutting machine needs to be removed as soon as possible to facilitate subsequent cutting operations. For laser cutting machine that does not have an automatic unloading device, the skeleton-shaped residual material can be cut into small pieces to facilitate quick removal. Thereby, the personal injury caused by the heavy and sharp-edged remnants of the operator is avoided.
Laser cutting machine co-edge cutting
Combine two or more parts together into a combination, and large batches of regular graphics should be shared as much as possible. Co-edge cutting can greatly shorten the cutting time and save raw materials.
Laser cutting machine parts collision
In order to maximize production efficiency, many laser cutting machine operate continuously for 24 hours, and use unmanned automatic loading/unloading devices. They hit the overturned parts that have been cut and cause damage to the cutting head and interruption of production. Big loss. This requires attention when sorting:
①Choose a suitable cutting path and detour the cut parts to reduce collisions.
②Choose the best cutting route to reduce cutting time.
③Automatically or manually combine multiple small parts with tiny connections. After cutting, the removed parts can easily disconnect the tiny connections.
The above is the precautions for the laser cutting machine typesetting tutorial, domestic laser cutting machine manufacturers.
MORN LASER
MORN Laser was established in 2008 and has more than ten years of production and export experience. With accumulated technology and guaranteed quality, we can provide customers with the best solutions. MORN laser accessories are all original products. We always take “Quality is Social Responsibility” as our corporate purpose, and constantly research better cutting solutions.
Our main products are fiber laser cutting machine, fiber laser welding machine, fiber laser marking machine, finer laser cleaning machine, etc. MORN laser is waiting for you!
